How to start your railroad scenery

You have quite a few options for scenery. Most modellers prefer foam insulation board. But you can also use newspaper with ‘plaster bandage’, or cloth smothered in glue(leave it to dry a while) to shape your scenery.

If you are short on space and want to make a ‘portable layout’ use foam. It’s a little fragile around the edges – but it’s by far the lightest option.

Don’t worry about the different brands and colors. Just by the cheapest. I’ve never found any difference in any of them.

Cutting the foam is easy. You might hear some folk go on about using hot wire cutters – but I’ve also found my old bread knife does the job a treat.

To make your mountains, just stack the foam boards up and glue them together and then get busy with your knife – that’s all there really is to it.

I prefer to use foam for the bigger mountains, and newspaper and plaster bandage for the more fiddly stuff.

Why simple track plans are best

Give a child a train set and a table and the firs thing they’ll do is use as much as the table as possible. They’ll be track everywhere. Why? Becasue it’s fun – and that’s the whole point of model railroading.

But, as soon as you start adding scenery and losing hours of your life covered in paints and glue, you soon come to realize, simple tracks just work better.

There’s two simple reasons why. For realistic looking scenery, you have to leave space for it. And a realistic looking model railroad comes from scenery with a track in it, not a load of track with scenery crow-barred in to it.

Any how, here’s some simple ones I’ve used in the past:

More on laying those tracks…

The best thing about model railroads is that any age, it’s still fun.

Here’s a fine point that demonsrates this. My grandson has been asking me for ages to help him build a railroad. So I thought a fine time to begin would be at the start of the summer holidays.

Now bearing in my mind my first post, here’s what we achieved. Take a look at the three pictures:

Here’s where we’ve put cork under the railtrack, after marking it out on the baseboard.

Here’s my grandson adding the ballast with a toothbrush.

And here’s where we add the glue with a 50/50 water mix.

Now remember I started this blog by saying model railroading is fun at any age? Well, it is – but more fun at different ages.  His track stayed as the last photo all summer…

 

Laying the track for your model railroad layout

I guess I’ve chosen laying your track for my first post because it’s something I’m always asked about. Lay your track poorly and it doesn’t matter how good the scenery is in your layout – you won’t have any fun. Smooth running of the tracks is everything.

I’ll presume you’ve decided on your layout. You have done that haven’t you?

Obviously the first thing to do is make sure it fits on your baseboard. Most people are short on space, so sometimes this means they try and squash their railroad on to their baseboard. Don’t do this! Whenever you get tracks just on the edge of the baseboard it means you’ll struggle with the scenery and it won’t look as good as it could.

Once you’re happy it sits on the baseboard, you need to mark it out so you can lay the cork underneath it.

My 11 year old recently asked me why modellers do this. Embarrassingly, I didn’t know. I just did it because that’s what I’d read all those years ago, and copied it.

But a quick ‘google’ found the answer. There’s two reasons: it softens the noise from the track and loco, and also gives you a great ‘shoulder’ for the ballast. Simple really!

Cutting your cork to shape can take a while. A sharp scalpel will save you no end of frustration. Once you’ve got the track pattern down, glue it down with PVC.

Next add your track back on. It should fit snuggly and you can see the ‘shoulder’ the ballast is going to sit on.

Now here’s the important part. Add your locos and carriages and plug in! Make sure they run smoothly. Move the points – in effect try and ‘break’ the layout (if you’ve got kids they’re great for this part).

As the next part is ‘gluing’ down the track, you need to be 100% sure the track runs fine without any hitches or derailmailments. Skip this part and it doesn’t matter how much time and love you put in to your model railroad, it’ll only end up annoying the crap out of you. Guess how I know this.

Gluing is the fun part because it’s where the layout starts to come to life. Add the ballast over the track and the sides. I use a toothbrush to brush it all in. It takes a while, but I always find it kind of therapeutic. Then get busy with the glue. Here’s how.

Get on old sprayer, fill it with a mixuture of PVC glue and water (50/50 mix). Then spray away! Be careful around points though – you don’t want those to cease up.

Give it a while to dry, because the next step really makes it look realistic. You’re going to need some very diluted black paint, and some ‘rust colours’ too. Take a small brush, dip it in the black, wipe the brush so it’s nearly dry and dab down the middle of the tracks on the ballast. Doing this alone to the ballast make it look very realistic.

Next, if you’ve got the patience of a saint, take a fine brush, dab the rust colours on the side of the rails (make sure you leave the tops of the rails shiny).

The end result always gives you a great start for your model railroad: smooth running track that’s anchored down and a great start on your scenery.